Schneider Altivar ATV310 Variable Speed Drive 4kW 3P ATV310HU40N4E

Product Description

This Altivar Easy 310 variable speed drive can feed 3-phase asynchronous motors up to a rated power of 4kW, 5hp at 380V to 460V AC. It is ideal to control motor speed for 3-phase constant torque applications. It has a compact form-factor with 140mm width, allowing for a flexible and easy installation on a mounting plate. It is suitable for the most common applications, including: textile, packaging and printing machines, material handling, machine tools, wood making machine, ceramic machine etc. It offers high readability of key parameters thanks to a bright LED 4-digit display. Underload and overload detection help to protect your installation. It also offers a door cover, status and faults display with navigation button.

Main Documents

User guide

https://download.schneider-electric.com/files?p_Doc_Ref=EAV96129

Product Specifications

Main
device short name	ATV310
IP degree of protection	IP20 without blanking plate on upper part, IP41 top
motor power kW	4 kW
network number of phases	three phase
operating position	vertical +/- 10 degree
output voltage	380...460 V three phase
power dissipation in W	102.72 W at In
product destination	asynchronous motors
product or component type	variable speed drive
product specific application	simple machine
range of product	Easy Altivar 310
[Us] rated supply voltage	380...460 V - 15...10 %
acceleration and deceleration ramps	S, linear from 0...999.9 s
ambient air temperature for operation	-10-55 °C without derating, 55-60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C
ambient air temperature for storage	-25-70 °C
analogue input number	1
analogue input type	configurable current AI1 0...20 mA 250 Ohm, configurable voltage AI1 0...10 V 30 kOhm, configurable voltage AI1 0...5 V 30 kOhm
analogue output number	1
analogue output type	AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits, AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
apparent power	9.1 kVA
assembly style	with heat sink
asynchronous motor control profile	quadratic voltage/frequency ratio, sensorless flux vector control, energy saving ratio
braking to standstill	by DC injection, <30 s
braking torque	up to 70 % of nominal motor torque without braking resistor, up to 150 % of nominal motor torque with braking resistor at high inertia
connector type	RJ45 (on front face) for Modbus
continuous output current	9.5 A at 4 kHz
depth	184 mm
discrete input logic	negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm, positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
discrete input number	4
discrete input type	programmable LI1...LI4 24 V 18...30 V
discrete output type	logic output LO+, LO-, protected relay output R1A, R1B, R1C 1 C/O
electrical connection	terminal, clamping capacity: 2.5...4 mm² (L1, L2, L3, PA/+, PB, U, V, W)
electromagnetic compatibility	voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11, electrical fast transient/burst immunity test - test level: level 4 conforming to EN/IEC 61000-4-4, electrostatic discharge immunity test - test level: level 3 conforming to EN/IEC 61000-4-2, immunity to conducted disturbances - test level: level 3 conforming to EN/IEC 61000-4-6, radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to EN/IEC 61000-4-3, surge immunity test - test level: level 3 conforming to EN/IEC 61000-4-5
EMC filter	without EMC filter
environmental characteristic	chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3, dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3
frequency resolution	display unit: 0.1 Hz, analog input: converter A/D, 10 bits
height	151 mm
insulation	electrical between power and control
line current	11.4 A
linearity error	+/- 0.3 % of maximum value for analogue input
maximum switching current	2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
maximum transient current	14.3 A for 60 s
minimum switching current	5 mA at 24 V DC for logic relay
motor power hp	5.5 hp
motor slip compensation	adjustable
net weight	1.8 kg
noise level	50 dB
nominal switching frequency	4 kHz
number of addresses	1-247 for Modbus
physical interface	2-wire RS 485 for Modbus
pollution degree	2 conforming to EN/IEC 61800-5-1
prospective line Isc	5 kA
protection type	line supply overvoltage, line supply undervoltage, overcurrent between output phases and earth, overheating protection, short-circuit between motor phases, against input phase loss in three-phase, thermal motor protection via the drive by continuous calculation of I²t
Quantity per set	set of 1
relative humidity	5-95 % without condensation conforming to IEC 60068-2-3, 5-95 % without dripping water conforming to IEC 60068-2-3
sampling duration	20 ms, tolerance +/- 1 ms for logic input, 10 ms for analogue input
shock resistance	15 gn conforming to EN/IEC 60068-2-27 for 11 ms
speed drive output frequency	0.5-400 Hz
speed range	1-20
standards	EN/IEC 61800-3, EN/IEC 61800-5-1
supply	internal supply for reference potentiometer: 5 V (4.75-5.25 V)DC, <10 mA with overload and short-circuit protection, internal supply for logic inputs: 24 V (20.4-28.8 V)DC, <100 mA with overload and short-circuit protection
supply frequency	50/60 Hz +/- 5 %
switching frequency	2...12 kHz adjustable
tightening torque	1.2-1.4 N.m
time constant	20 ms +/- 1 ms for reference change
transient overtorque	170-200 % of nominal motor torque depending on drive rating and type of motor
transmission frame	RTU for Modbus
transmission rate	4800 bit/s, 9600 bit/s, 19200 bit/s, 38400 bit/s
type of cooling	integrated fan
width	140 mm

Show More Specification

Product From Same Category

Write Your Own Review

You're reviewing:Schneider Altivar ATV310 Variable Speed Drive 4kW 3P ATV310HU40N4E

Your Rating

Quality

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Ringkasan Pembelian

Review